Centro Assistenza
AlphaTheta Centro Assistenza
/
Supporto
/
Audio e Suono
/
Problemi di uscita audio
Problemi di uscita audio
Articoli
Il suono è troppo basso o troppo alto quando l'audio viene immesso tramite USB nel mio PC/Mac.Perché?
L’audio dalle cuffie o dagli altoparlanti non è corretto. Perché?
Il suono è estremamente distorto o il misuratore di livello del canale rimane al massimo. Perché?
Il suono è affetto da distorsione o clipping.
Il suono salta, si interrompe o è influenzato dal rumore. Che cosa devo fare?
A volte il volume si abbassa improvvisamente. Perché?
Sometimes the talk over function gets activated and the master sound gets weaker even when not speaking into the mike.
The output sound is distorted.
Audio distortion, glitches, clicks, dropouts or noise
No sound is output from the headphones or master output, or the sound is low.
Even when I'm not speaking into the microphone (MIC), the talk over function is sometimes activated and the master sound volume is reduced.
When I change the tempo with the master tempo turned on, the sound seems distorted. Is this a malfunction?
The sound of the microphone is distorted.
When I change the tempo with the master tempo turned on, the sound seems distorted. Is this a malfunction?
With a Mac computer, the USB sound card (audio interface) does not work well.
Only stereo channel 1 can be used when this unit is connected to a computer.
The sound is distorted when an analog player is connected to this unit's [PHONO] terminals, and the indication on the channel level indicator does not change when the [TRIM] control is turned.
The output sound is sometimes low.
The output sound is low or too high when USB signals are input.
I am using a Mac computer, and sound cannot be input/output with the USB sound card (audio interface) function. The dedicated driver software has been installed normally.
The output sound is low or too high when digital signals are input.
Sound skips when using the USB sound card (audio interface) function.
The sound is distorted.
Digital sound cannot be output.
Even when no sound is being input to the microphone (MIC) terminal, the talk over function is sometimes activated and the master sound gets low.
Carica altro
Trova le risposte dalla nostra Comunità mondiale di fan esperti dei nostri prodotti
Visita la comunità
