Output Issues
Articles
Output sound is low or too high when digital signals are input.
06/29/2023
The output sound sometimes becomes smaller.
06/30/2023
Sound from the microphone is distorted.
06/30/2023
Even when I'm not speaking into the microphone (MIC), the talk over function is sometimes activated and the master sound volume is reduced.
06/30/2023
Sound is distorted when an analog player is connected to this unit’s [PHONO] terminals. Or, lighting of the channel level indicator does not change even when the [TRIM] control is turned.
06/30/2023
Even though the unit is connected to my computer, only the stereo 1 channel can be used.
06/30/2023
There is sound skipping, intermittent sound, distorted sound or noise.
06/30/2023
Sound of the external effecter is distorted.
06/29/2023
Digital sound cannot be output.
06/29/2023
Sound is distorted.
06/29/2023
Sound is distorted when an analog player is connected to this unit's [PHONO] terminals, or indication on the channel level indicator does not change when the [TRIM] control is turned.
06/29/2023
Even when no sound is being input to the microphone (MIC) terminal, the talkover function is sometimes activated and the master sound gets low.
06/29/2023
Sound skips when using the USB sound card (audio interface) function.
06/29/2023
I am using a Mac computer, and sound cannot be input/output with the USB sound card (audio interface) function. The dedicated driver software has been installed normally.
06/29/2023
The sound is distorted when an analog player is connected to this unit’s [PHONO] terminals, or the channel level indicator does not change when the [TRIM] control is turned.
06/27/2023
Digital sound cannot be output.
06/26/2023
Even when no sound is being input to the microphone (MIC) terminal, the talkover function is sometimes activated and the master sound gets low.
06/26/2023
Sound is distorted when tracks recorded on USB devices are played.
06/27/2023
Sound is distorted.
06/27/2023
Sound is distorted when an analog player is connected to the DJM-350's PHONO inputs. Also, level meter display does not lower when input trimmer is turned down.
06/27/2023
The sound is distorted.
06/27/2023
Output sound is sometimes low.
06/29/2023
The output sound is distorted.
06/28/2023
The sound skips when the DJM-5000 is used as an audio device.
06/28/2023
Output sound is low or too high when USB signals are input.
06/29/2023
