How can I perform/cancel Bluetooth pairing with the DM-40D-BT speakers?

[Pairing procedure]
1. Turn on the power for the speakers.
2. Follow the pairing instructions on the Bluetooth device while the Pairing indicator on the speaker is flashing.
*You may need to refer to the instruction manual of the Bluetooth device.
Note: If the Pairing indicator on the speaker is turned off, press the Pairing button for at least 2 seconds until it starts flashing (Pairing mode).
3. Pairing is complete when the Pairing indicator is lit.

[Canceling procedure]
Following the instructions of the Bluetooth device, cancel the pairing of the speakers via the Bluetooth setting on the device.
*You may need to refer to the instruction manual of the Bluetooth device.