How do I prepare sample sound sources?
Download the RMX-IGNITE Sample Manager from here and install it on your PC/Mac. Then, export the sample bank to a storage media such as a USB device using the following steps.
1. Select the bank where you want to add sample sound sources in [BANKS], then enter the bank name.
2. Drag and drop your preferred sound sources from [SAMPLE BROWSE] into each slot of [BANK EDIT] to assign them.
3. If necessary, adjust various settings (Start/End Point, Gain, etc.) for the sample sound source assigned in [SLOT EDIT].
4. Repeat steps 1–3 for up to 15 banks.
5. Set the bank you want to load without browsing to [FAVORITE BANK] in RMX-IGNITE.
6. Export the configured bank data to a USB device, etc. using [EXPORT].
You can browse and load the exported data from the unit's [SAMPLE BROWSE] screen by connecting a USB device to the [USB for SAMPLER] port on the rear of the unit, or by connecting to a multi player in the PRO DJ LINK network to which the unit is connected.
For detailed instructions on using the RMX-IGNITE Sample Manager, refer to its Instruction Manual here.
