Sound comes out of my headphones or speakers incorrectly. Why?
When no sound comes out or the volume is low, check each of the below in the following order:
This is an example when you use DJ players connected to [LINE] input.
1. Check the DJ players are connected properly.
2. Check the input selector switches on the relevant channels are set to [LINE].*
3. Play a track on the DJ player.
4. Adjust the [TRIM] knob so the channel level indicator lights up with the peak level at around [0] dB.
5. Slide the channel fader to the top.
6. Adjust the MASTER [LEVEL] knob so the master level indicator lights up with the peak level at around [0] dB (so that the red light doesn't turn on).
If you don’t hear any sound from the headphones (HEADPHONES) at this point, check the following:
7. Turn the [MIX] knob to the center.
8. Turn the [LEVEL] knob all the way to the left.
9. Press the [CUE] button.
*Set the input selector switches according to the sound input. For example, select [PC (PC icon)] for the sound of a PC/Mac connected to the USB Type-C port on the rear panel of the unit, and select [PHONO] for a turntable connected to the PHONO terminal.
If the volume is still low, adjust the [ATT.] setting.
For details, see [Utility settings] in [Settings] in the Instruction Manual.
You can read the Instruction Manual here.
