I hear clipping noises in tracks I’ve played on the PLX-500 and recorded in rekordbox.

If you can hear clipping noises in tracks you’ve played on the PLX-500 and recorded in rekordbox, follow the steps below.

Please note: these instructions are based on using Windows 10.

 

1. Close
2. Unplug the USB cable connecting the PLX-500 and your
3. Open [Control Panel] > [Sound].
4. On the [Playback] tab, select the device as [Default Device], and click [Properties].
   
5. From [Advanced] > [Default Format], make a note of the sample rate in [XXXXX Hz] and close the [Properties]

          * [48000 Hz] is shown in the above window as an example.

6. Plug the USB cable back into your computer and connect it to the PLX-500.
7. From [Sound] window > [Recording], select [LINE USB AUDIO CODEC] and click [Properties].

 

8. Click [Advanced] > [Default Format] and select the same sample rate value [XXXXX Hz] that you saw in step 5. Then, click [OK] and close the

          Please be sure not to select anything which includes [1 channel].

9. Close the [Sound] window. Start rekordbox and begin recording