Sound comes out of my headphones or speakers incorrectly. Why?
When no sound comes out or the volume is low, check each of the below in the following order:
This is an example when you use multi players connected to [LINE] input.
1. Check the multi players are connected properly.
2. Check the input selector switches on the relevant channels are set to [LINE].*
3. Play a track on the multi player.
4. Adjust the [TRIM] knob so the channel level indicator lights up with the peak level between [0] - [9].
5. Turn the channel rotary fader to between the [7] - [10] positions.
6. Adjust the [MASTER LEVEL] knob so the screen shows the peak level around [0.0 dB].
If the volume is still low, adjust the [MASTER ATT.] setting.
If you don’t hear any sound from the headphones at this point, check the following:
7. Turn the [MIX] knob to the center.
8. Turn the [LEVEL] knob all the way to the left.
9. Turn the [LEVEL] knob slowly to the right.
*Set the input selector switches according to the sound input.
For details, see [Utility settings] in [Settings] in the Instruction Manual.
You can read the Instruction Manual [here].
