How can I perform/cancel pairing?

[Bluetooth pairing procedure]

1. Press and hold the power button for approximately 1 second to turn on the power for the speaker.

2. Press and hold the Bluetooth button for approximately 3 seconds, the Bluetooth indicator LED double-blinks repeatedly.

3. Follow the pairing instructions on the Bluetooth device while the Bluetooth indicator on the speaker is double-blinking.

*You may need to refer to the instruction manual of the Bluetooth device.

Note: If the Bluetooth indicator on the speaker is turned off, press the Bluetooth pairing button for at least 3 seconds until it starts double-blinking (Pairing mode).

3. Pairing is complete when the Bluetooth indicator is lit.

[Bluetooth canceling procedure]

Cancel the pairing of the speaker via the Bluetooth setting on the Bluetooth device.

*You may need to refer to the instruction manual of the Bluetooth device.

[SonicLink pairing procedure]

1. Press and hold the transmitter pairing button for 3 seconds to turn the power on. The connection indicator LED double-blinks repeatedly.

2. Press and hold the power button for approximately 1 second to turn on the power for the speaker.

3. Press and hold the SonicLink button for approximately 3 seconds, the indicator double-blinks repeatedly.

4. Wait until the indicator stays lit.

5. The pairing is complete when the indicator stays lit.

Note: When the SonicLink indicator turns off on the speakers, press and hold the SonicLink button for approximately 3 seconds until it double-blinks repeatedly.

Note: When the connection indicator turns off on the transmitter, press and hold the pairing button for approximately 3 seconds until it double-blinks repeatedly (Pairing mode).

[SonicLink canceling procedure]

Press and hold the SonicLink button for 3 seconds on the speaker.

Or press and hold the pairing button for 3 seconds on the transmitter.