Let me know the procedure for operating MIX POINT LINK function with a mouse.

Example:

Procedure for mixing from track A of Deck 1 to track B of Deck 2.

1. Set Hot Cues or Memory Cues to the position of MIX POINT preliminarily. To use SYNC function, set BEAT SYNC to ON.
2. Click MIX POINT LINK panel button of global section to display MIX POINT LINK panel.
3. Load track A to Deck 1 to replay it. Load track B to Deck 2.
4. Click the Enlarged Waveform of Deck 1 in MIX OUT selection mode to set the Deck 1 to MIX OUT deck.
5. Click the marker of Hot Cues/Memory Cues that is displayed on Enlarged Waveform of Deck 1 to set it to MIX POINT (MIX OUT).
6. Click the Enlarged Waveform of Deck 2 in MIX IN selection mode to set the Deck 2 to MIX IN deck.
7. Click the marker of Hot Cues/Memory Cues that is displayed on Enlarged Waveform of Deck 2 to set it to MIX POINT (MIX IN).
8. Press MIX POINT LINK button and set MIX POINT LINK.

If the replay bar of Deck 1 reaches the beginning of Deck 2, the automatic playing starts.

*The MIX POINT set in steps 5 and 7 can also be set by pressing the [MIX POINT SELECT] button on the MIX POINT LINK panel.
*When the Silent is turned on, the tracks in the deck are muted from the start of a track to the Silent end point. To turn on the Silent, select deck 2 in the MIX IN selection mode after step 7 or 8, then turn on the [SILENT on/off] button.