What does it mean when the SYNC button is flashing?

The sync function normally synchronizes the BPM and beat position. When the SYNC button is flashing, only the BPM is being synchronized. The button switches from lit to flashing under the conditions described below.

-When the pitch bend operation is performed on the deck that is not the master.

-If BPM of the slave dack is less than the master deck's BPM, even if the tempo is +16%, synchronization is not possible and the "OUT OF RANGE" message appears. If the master deck's tempo is changed after this by moving the tempo slider and set to within the tempo range of the deck that is not the master, the SYNC button flashes.

The flashing can be stopped by following the procedure below.

-Press the SYNC button.

The SYNC button turns off.

-Load a track.

-The deck whose SYNC button is flashing is set as the master deck.