The rotational torque of the control disk doesn't feel as heavy as it should. What should I do?

1. Install the Magvel Clamp correctly to the spindle.

2. Firmly press the top of the Magvel Clamp from above.

3. Turn the dial clockwise to increase the rotation torque.

For details on installing the Magvel Clamp, see [Setup] > [Using DVS without using the tone arm] in the Instruction Manual.

For the adjustment of the Magvel Clamp, see [Adjustment] > [Using DVS without using the tone arm] in the Instruction Manual.

The Instruction Manual is available [here].