No audio output through the master output or headphones.

Is the driver software already installed on the computer?

With Windows, download the latest driver software and then install it.

http://www.pioneerdj.com/en/support/software/ddj-sb2#drivers

Refer to “Installing the software” on the operating instructions to install the driver software.

[How to output the sound]

How to output the sound from CH1 is described below as an example.

-Outputting the sound from MASTER OUT:

Ensure that the volume of the devices (Powered amplifier, powered speaker, etc.) connected to [MASTER OUT ] is properly adjusted. Please note if the volume is increased too high, an extremely loud sound would be output.

　1. Turn the knob to an appropriate position.

　2. Play a track.

　3. Move the channel fader away from you.

　4. Turn the [TRIM] knob to adjust the orange LED of the channel level indicators to light at the peak level.

　5. Turn the [MASTER LEVEL] knob to adjust the output sound from the speakers.

-Outputting the sound from a headphone:

　1. Adjust the knob position.

　2. Press the [CUE] button on CH1.

　3. Turn the [HEADPHONES LEVEL] knob to adjust the output sound from the headphone to the appropriate level.