When a backspin is performed, the playback position of the track advances in the direction of rotation for a while even after rotation of the jog dial is stopped.

When the [Backspin Length] setting of utilities mode is set to [Normal] or [Long], the behavior may be as if the jog dial continues to be rotated even after it has stopped being rotated due to software processing. To match the playback position to the actual rotation state of the jog dial, set the [Backspin Length] setting to [Short].

The procedure to set the [Backspin Length] setting to [Short] is as follows.

1) Disconnect the USB cable connecting the unit and computer.

2) Turn on the power of the unit while pressing the [SHIFT] and [PLAY/PAUSE] buttons on the left deck.

3) Press pad 6 of the performance pads on the right deck and check that the pad lights.

4) Turn off the power of the equipment.